HYPER-V Manager Network Connection/adapter issue

Today, I have downloaded windows 8 and started configuring a new Virtual machine on Hyper-v manager.Unluckily,while configuring Network,the drop down yielded nothing (just showing ‘Not Connected’).

Microsoft Synthetic Ethernet Port (Instance ID {EAC7FE2C-1A20-4F2B-A0C0-E328A5AE5F56}): Failed to Power on with Error ‘The system cannot find the path specified.’

The switch port connection for “Network Adapter” is invalid.

After thorough Go-ogling,Found this useful information and also resolution for one more error

Error Applying New Virtual Network Changes

1) Open Network Connections

Windows Server 2008 Start > Settings > Network Connections.
There is a ‘Local Area Connection’ network. It is a physical network adapter for Hyper-V Virtual Network.

Virtual Network configure 1

2) Open Properties of Local Area Connection

Right click ‘Local Area Connection’ and select ‘Properties’.

Virtual Network configure 2

2) Open Properties of ‘Internet Protocol Version 4TCP/IPv4)’

Click ‘Internet Protocol Version 4(TCP/IPv4)’ and select ‘Properties’.

Virtual Network configure 3

3. Configure Windows Hyper-V Virtual Network

1) Open Windows Hyper-V Manager

Windows Server 2008 Start > Programs > Administrative Tools > Hyper-V Manager.

2) Open Virtual Network Manager

Click “Virtual Network Manager…” in the right side “Actions” panel.

Step by Step Guide to Configure Windows Hyper-V Virtual Network Step 1

3) Add a New Virtual Network

Select ‘External’ and click ‘Add’.

Step by Step Guide to Configure Windows Hyper-V Virtual Network Step 2

4) Set Virtual Network

  1. Input the New Virtual Network
  2. Select correct physical network adapter for Hyper-V Virtual Network
  3. Click OK

Step by Step Guide to Configure Windows Hyper-V Virtual Network Step 3

5) Apply Networking Changes

There will have a new warning window. Click ‘Yes’ to apply the changes

Step by Step Guide to Configure Windows Hyper-V Virtual Network Step 4

Note:
The network may be disconnected if you use a static IP. Please re-config the ‘Local Area Connection 4’ as the old Local Area Connection.

Error : Error Applying New Virtual Network Changes

Solution :

Use NCPA.CPL on your host and check the properties of the physical NIC.  If  it’s already bound to the switch Protocol (Microsoft virtual Switch Protocol), uncheck this binding and try again.

4. Network Settings After Install Hyper-V Virtual Network

1) Open Network Connections

Windows Server 2008 Start > Settings > Network Connections.
There is a new ‘Local Area Connection 4’ network. It is the External Virtual Network that has been created.

Step by Step Guide to Configure Windows Hyper-V Virtual Network Step 5

2) Open Properties of ‘Local Area Connection’

Right click ‘Local Area Connection’ and select ‘Properties’.
There is only ‘Microsoft Virtual Network Switch Protocol’ enabled after installed External Virtual Network.

Step by Step Guide to Configure Windows Hyper-V Virtual Network Step 6

3) Open Properties of ‘Local Area Connection 4’

Right click ‘Local Area Connection4’ and select ‘Properties’.
It will have the same settings to the Local Area Connection’s old settings

Step by Step Guide to Configure Windows Hyper-V Virtual Network Step 7

4) Open Properties of ‘Internet Protocol Version 4TCP/IPv4)’

Click ‘Internet Protocol Version 4(TCP/IPv4)’ and select ‘Properties’.

Step by Step Guide to Configure Windows Hyper-V Virtual Network Step 8

Advertisements

3 thoughts on “HYPER-V Manager Network Connection/adapter issue

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s